PLUMBING SUPPLIES
   Stainless, copper, pvc, cpvc, brass
Weldless ball valve 1/2" SS
$32.95
LOTS OF NEW
PARTS ON THE WAY!!
                      HOME  BEER  WINE  KEGGING  DRAFT
1/2" weldless ball valve with
downtube assembly atached.
Valve is Stainless Steel/downtube
is copper
Counterflow Assembly. Build your own.
3/8" x 50' copper refer tube.
$74.99
this is stronger more ridgid refer tubing. Great for making immersion chillers, counterflow chillers or prechillers.
1/2" ss ball valve
$16.95
1/2" stainless steel full port ball vavle. FPTxFPT
copper downtube assembly
$5.95
1/2" copper downtube assembly for Kettle or Hot Liquer Tank 1/2" MPT to connect to coupler on valve assembly 90 elbow,45 elbow,3" long downtube( can be ordered with different tube lengths(email or call)
ss full coupler 1/2"
$3.99
stainless steel full coupler. 1/2" FPT
ss Nipple 1/2" x 1" long
$4.95
Stainless Steel Nipple. 1/2" MPT x 1" in length.
S/S street elbow 1/2" FPT x 1/2" MPT
$4.50
S/S elbow 1/2" FPT x 1/2" FPT
$3.99
Stainless Steel elbow. 1/2" FPT x 1/2" FPT.
S/S 1/2" lock nut
$2.50
Stainless Steel 1/2" FPT lock nut.
S/S 1/2" barb x 1/2" MPT
$4.99
Stainless Steel 1/2" barb x 1/2" MPT. For 1/2" ball valves.
S/S 1/2" MPT x 3/8" barb elbow.
$5.99
silicone O_RING 1/2"
$0.38
silicone High Temp O_RING. Fits 1/2" pipe thread. Used for 1/2" weldless fittings in kettles.
silicone O_RING 3/8"
$0.38
Silicone High Temp O_RING fro 3/8" pipe threads. Used for 3/8" weldless fittings in kettles.
Counter
Sparge Assembly Gravity
$18.99
This is a real simple gravity sparge arm. This is designed to work with a 1/2" FPT ball valve on the HL Tank. The kit comes with a 1/2" MPT fitting to elbow flare fitting. The sparge arm is all copper with small holes drilled into the the top of the ring for gentle sparging. There is a short piece of tubing that connects the ring and the flare fitting. Screws on and off the HL tank for easy use and removal. Approximately 9" in diameter. This unit is neither soldered or brazed together to allow it to be disassembled and cleaned. The tubing and T fitting are rather crimped together and held in place by friction so that the unit can be disassembled to clean.
Burner - 55,000 btu propane
$19.95
Perfect for 5 to 20 gallon batch sizes. 3 7/8'' wide at the widest point. You will need our high-pressure, adjustable pressure regulator to operate burner. This is a ring style burner and not a jet burner. The flame distribution and control is great and not concentrated like a jet burner. Will not work with low pressure propane (house propane) or with natural gas. Ideally you want to install these about 4-6 inches below the kettle. These burners do not come with a brass jet