The Barley Crusher
Grain Mills
The Barley Crusher MaltMill 7# hopper
$114.00
Rollers are adjustable at both ends to keep the gap spacing parallel giving a uniform crush along the entire length of the rollers. The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousands of an inch. The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging. Comes with a solid base with locators to center the Barley Crusher on a 5 gallon plastic pail. (Pail not included) The standard hopper holds an even 7 pounds. Using a 3/8 drillmotor at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy. The Barley Crusher is shipped fully assembled. There are no adapters needed to use a 3/8 drill motor.
Corona Grain Mill
$55.00
Includes high hopper for greater capacity. This is a plate mill. I have the same mill which i have used for over 1 & a half years. (i have modified mine with a 40# hopper & an ice cream motor, slow but easy!)
The Barley Crusher MaltMill 15# hopper
$137.50
Rollers are adjustable at both ends to keep the gap spacing parallel giving a uniform crush along the entire length of the rollers. The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousands of an inch. The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging. Comes with a solid base with locators to center the Barley Crusher on a 5 gallon plastic pail. (Pail not included) The standard hopper holds an even 15 pounds. Using a 3/8 drillmotor at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy. The Barley Crusher is shipped fully assembled. There are no adapters needed to use a 3/8 drill motor.
Error:
Data not available (103)
Data not available (103)
" >
Data not available (103) ">
Error:
Data not available (103)
Data not available (103)
Return to Previous Page
